HEAT MOLDING INSTRUCTIONS
Solite Boots are the world's first and only custom, heat-moldable watersports footwear. Custom fitting can be done in your kitchen with nothing more than a kettle of boiling water. To heat-mold your Solite boots, watch the video below and follow the instructions carefully. Do not use any other methods of heat molding except boiling water. Use of ovens, microwaves, heat guns, etc. will void your warranty.STEP-BY-STEP
1. Bring water to a boil (you will need approximately 3 cups of boiling water per boot.) 2. While water is heating, roll down the cuffs of your Solite boots and place them in a sink. 3. Put on your Solite Heat Booster socks. These socks will help allow for a little extra space when the boots are being molded. 4. Once water comes to a full bubbling boil, gently pour into your Solite boots (in the sink), filling each to slightly below the seam where the neoprene upper is attached to the sole. See photo.![](https://cdn.shopify.com/s/files/1/0696/9576/6814/t/5/assets/9a01ef0bca11901bfa2445ecd1927153.png?v=1672936619)